Name | 1,2-Diphenoxyethane |
Synonyms | 1,2-Diphenoxyethan sym-Diphenoxyethane 1,2-Diphenoxyethane 1,2-Diphenoxy ethane Ethlene diphenyl ether (2-Phenoxyethoxy)benzene Ethylene glycol diphenyl ether 1,1'-[ethane-1,2-diylbis(oxy)]dibenzene 1,1'-[1,2-ethanediylbis(oxy)]bis-benzen 1,1'-[1,2-Ethanediylbis(oxy)]bisbenzene 1,2-Diphenoxyethane,Ethylene glycol diphenyl ether |
CAS | 104-66-5 |
EINECS | 203-224-9 |
InChI | InChI=1/C14H14O2/c1-3-7-13(8-4-1)15-11-12-16-14-9-5-2-6-10-14/h1-10H,11-12H2 |
InChIKey | XCSGHNKDXGYELG-UHFFFAOYSA-N |
Molecular Formula | C14H14O2 |
Molar Mass | 214.26 |
Density | 1.0781 (rough estimate) |
Melting Point | 94-96 °C (lit.) |
Boling Point | 185 °C / 12mmHg |
Flash Point | 139.4°C |
Water Solubility | 22mg/L at 25℃ |
Solubility | Chloroform (Slightly), Methanol (Slightly) |
Vapor Presure | 0Pa at 25℃ |
Appearance | grayish white crystal |
Color | White to Off-White |
BRN | 2052248 |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.5570 (estimate) |
MDL | MFCD00003039 |
Use | This product is for scientific research only and shall not be used for other purposes. |
Risk Codes | 51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
Safety Description | S22 - Do not breathe dust. S24/25 - Avoid contact with skin and eyes. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S36 - Wear suitable protective clothing. S29/56 - |
UN IDs | UN 3077 9 / PGIII |
WGK Germany | 3 |
TSCA | Yes |
HS Code | 29093090 |
LogP | 3.81 at 25℃ |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
use | 1,2-diphenoxyethane (DPE) has attracted much attention as a new type of heat-sensitive material sensitizer and a potential polyolefin catalyst additive. |
Synthesis method | Only a few documents have reported the synthesis of 1, 2-diphenoxy ethane, mainly through phenol and 1, 2-dichloroethane or ethylene glycol sulfonate in alkaline water or ethanol medium. The reaction is prepared as the starting material. The yield is reported to be as high as 80%, but the product contains more impurities, the synthesized crude product needs to be purified by high temperature distillation (collection temperature is about 200 ℃, vacuum degree is below 700Pa). This process consumes a lot of energy, and due to the high freezing point of the product, it is easy to block the pipeline, which puts forward high requirements on the equipment. There are also reports of synthesizing 1,2-diphenoxy ethane with 1,2-dibromoethane and phenol as raw materials and ethanol as solvent, but the yield is only 30%. In the reaction, 1,2-dibromoethane is easy to undergo side reactions to convert into bromoethylene, resulting in low yield. |